The Rubber Barrel and Screw manufacturer will show you: the working process of the twin-screw rubber barrel

Many netizens are asking about the working principle of the twin-screw rubber barrel. The Rubber Barrel and Screw manufacturer tells you that the work can be roughly divided into three processes. The following is what the Rubber Barrel and Screw manufacturer has done to this problem. Finishing.

Many rubber and plastic twin-screw rubber barrels have done a lot of research. In order to better improve the production process and scenic spots, the research on it is still going on. However, the working principle and working process of it have been very clear. Awareness.
First, let's learn the working principle of the single-screw rubber barrel: The Rubber Barrel and Screw manufacturer tells you to convey the melting and pressurization of solids and pump the mixed gas and devolatilization. As for the twin-screw rubber barrel, there are many types, which brings difficulties to people's research.
On the whole, the working principle of the twin-screw rubber barrel can be divided into three processes:
1. The manufacturer of Rubber Barrel and Screw tells you that in the process of polymer production, because of the law of physical state change, coupled with the law of conveying the solid melt, a physical model can be established to make the design and production of the barrel more Excellent.
2. If there are more than two types of polymers and materials, it is necessary to ensure the changes in the physical state, structural changes and performance status during the production process.
3. The Rubber Barrel and Screw manufacturer tells you that when the twin-screw rubber barrel is working, the relationship between the reaction process, speed, performance, and product structure and operating conditions will make the extrusion effect better.
The Rubber Barrel and Screw manufacturer tells you that the three processes of the twin-screw rubber barrel work are introduced here. Regardless of whether it is a single-screw structure or a twin-screw structure, in the usual production process, a rubber barrel produced by a regular manufacturer should be selected.