Latest Exhibition Information
Single Screw Extruder Screw and Barrel manufacturers take you to understand which industries need to use extruder screws
The manufacturer of Single Screw Extruder Screw and Barrel tells you that the extruder screw intuitively understands the wear phenomenon of wearing parts. Now the general twin screw extruder needs to use a large amount of cleaning material to clean the machine when changing colors, which is time-consuming and expensive. Electricity and waste of raw materials, and the split twin-screw extruder can solve this problem. When changing the color, it only takes a few minutes to quickly turn over the barrel for manual washing.
Single Screw Extruder Screw and Barrel manufacturers tell you that you can find out the wear level of the threaded element barrel liner at any time, and you can also analyze the turbidity process by looking at the melt profile on the entire screw, so that you don't have to or less Use cleaning material, then perform useful repairs or replacements, and then extract the screw as a whole, while the split twin-screw does not have to, just loosen how many bolts of the twin-screw extruder.
Single Screw Extruder Screw and Barrel manufacturers tell you that the rolling worm gear box handle device lifts the upper half of the barrel to open the entire barrel. When repairing, the heating and cooling system of the ordinary twin screw extruder often needs to be removed first. , and then repair it later, which not only shortens the repair time, but also reduces the labor intensity. It will not be discovered when there is a problem with the extruded product, causing unnecessary waste and reducing production costs. When manufacturing masterbatches, it is often necessary to change colors. , Single Screw Extruder Screw and Barrel manufacturers tell you that if you need to replace the product, save money, open the open processing area in minutes.